| 1. | Series connected and parallel connected centrifugal pump and their economy analyses
离心水泵串并联及经济性 |
| 2. | Series connecting bolt type
Hrc系列螺栓连接熔断器 |
| 3. | Standard requirements , terminology and test code for dry - type air - core series connected reactors
干式空心串连电抗器的标准要求术语和试验规程 |
| 4. | Polymeric substrates , being light , large area series connected , flexible and non - breaking , offer additional unique advantages
因此柔性衬底太阳电池无论在军事上，还是民用上都有很广阔的应用前景。 |
| 5. | Apparatus with one or more particular functions for connection to certain public switched telephone networks - specification for series connected apparatus - apparatus having maximum allowable impairments
连接某些公共开关电话网络的单功能或多种特别功能设备.串联设备规范.具有最大允许故障率的设备 |
| 6. | With leds series connected , accurate current regulation for uniform illumination can be obtained . the circuit includes a 30v , low rdson n - channel mosfet switch for high efficiency up to 84 % and maximum battery life
内置耐压30v的低导通电阻n沟mosfet开关使电路能获得高达84 %的效率,延长了电池使用寿命。 |
| 7. | Apparatus with one or more particular functions for connection to certain public switched telephone networks - specification for series connected apparatus - apparatus having less than maximum allowable impairments
接连某些公共开关电话网络的单功能或多种特别功能设备.串联设备规范.具有小于最大允许故障率的设备 |
| 8. | " automatic reset n . c . series connected thermal overload protection , two moisture sensing probes , prelubricated shaft bearings and class f insulation . * efficiencies include all mechanical losses including mechanical seals .
自动重置n . c .系列,连接过热保护装置,两个潮气检测探头,预润滑轴承和f级绝缘。 *效率包括所有机械密封中的机械损失。 |
| 9. | Traditional ni / mh battery pack is composed of series connected cells . there are connection parts such as electrode tab , connection bar , battery case , etc . , these increase the weight and intrinsic resistance of the battery
传统的mh / ni电池组是由单体电池串联而成,在电池组中存在极耳、连接条、电池壳等连接体,增大了电池的质量和内阻。 |
| 10. | Due to there maybe being a series connect printer or other peripheral and protection locks behind the hardware lock , and the output voltage standard of printer port is 5v , if the components of a protection lock all use the power around 5v , it will cause difficulties usually when being used
由于在硬件锁后面有可能串接打印机，或是其它的保护锁或外围设备，而打印机端口的输出电压标准为5v ，如果保护锁组成零件都是工作于5v的范围，这样将会经常造成使用上的困扰。 |
